LASERTEC 12 SLM by DMG MORI

LASERTEC 12 SLM

Additive Manufacturing by selective laser melting (SLM)

Build volume X
125 mm
Build volume Y
125 mm
Build volume Z
200 mm
Min. Layer thickness
20 µm
Min. Focus diameter
35 µm
Laser power standard
200 W
Control & software alternatives
CELOS/RDesigner
Highlights

Additive Manufacturing by selective laser melting (SLM) in powder bed

  • Highly complex components with function integration
  • Internal close-contoured cooling channels
  • Weight optimisation due to lattice and honeycomb structures as well as topology-optimised components
  • Simultaneous build-up of different designs
  • Functional prototypes made of series materials 

Additive Manufacturing with a 125 x 125 x 200 mm (X / Y / Z) building volume

  • High precision building of 3D parts with a focus diameter of only 35 µm
  • Application-specific fibre laser sources from 200 W as standard to 400 W optional
  • Optimised shield gas volume flow for highest component quality with minimum Argon consumption
  • Open system: Individual adjustment of all machine settings and process parameters as well as unrestricted selection of the material supplier
  • End-to-end competence with integral process understanding from drawing to finished part: DMG MORI Process Chains for pre- and post-processing of additively built parts

rePLUG – The powder module for fast material change

  • Automated powder handling: Integrated powder-recycling for maximum efficiency and highest work-safety due to closed material cycle 
  • One material per rePLUG – Any expansion of the material range due to modular changing system
  • Contamination-free change between different materials in <2 hours
  • High process autonomy due to powerful duo filter system (filter change without process interruption) as well as large powder reservoir (no manual refilling required in the process)
  • Optional: rePLUG RESEARCH The additional powder module, especially developed for the material and process parameter development on the series system

ADDITIVE MANUFACTURING
Application Examples
Control & Software
OPTOMET

NEW: OPTOMET - First time right Parameter Optimization Software

  • Expert knowledge at your finger tips - Parameter development for NEW materials within minutes

  • 20% less material costs - Increased usage of recycled powder without any loss of quality 

  • Fully adaptable material properties and layer thicknesses 

  • rePLUG reSEARCH and OPTOMET - The combination for material development 

CELOS: Consistent software solution from CAM programming up to machine control

  • Intuitive machine operation due to touchscreen and APP-based control
  • RDesigner: CAM Programming directly on the machine control
  • HEAT-Calculation: Patented advance calculation of mass distribution and automatical adjustment of all laser parameters for top component quality
  • Monitoring tools: Camera-based process monitoring of the build-up and coating quality

OPTOMET - First time right
Service & Training
DMQP Powder Cycle

We focus on open powder selection on the one hand and a qualified as well as integrated powder cycle on the other hand in the area of our LASERTEC SLM line.

We provide our customers with a wide powder portfolio which is finally validated in a LASERTEC SLM machine on top of the quality requirements that are already very demanding.


Browse powders in our Online Shop
Downloads & Technical Data

Downloads

Technical Data
Build volume X
125 mm
Build volume Y
125 mm
Build volume Z
200 mm
Min. Layer thickness
20 µm
Max. Layer thickness
100 µm
Min. Focus diameter
35 µm
Laser power standard
200 W
Laser power optional
400 W
Inert gas
Argon
Inert gas consumption
70 l/h

DMG MORI uses cookies to ensure you the best experience on our website. When you browse the website you agree to our use of cookies. More information on data protection and revocation. Terms and Conditions. Imprint. Exlusion of liability