ULTRASONIC 60 eVo linear
Universal ULTRASONIC Machining Centre
Max. X-axis stroke
600 mm
Max. Y-axis stroke
500 mm
Max. Z-axis stroke
500 mm
Max. workpiece diameter
630 mm
Max. workpiece height
500 mm
Max. workpiece weight
400 kg
Control & software alternatives
SIEMENS
Highlights
ULTRASONIC by DMG MORI
ULTRASONIC technology integration - reduced process forces for higher productivity
- Technology integration via HSK-A63 / HSK-A100 interface for ultrasonic superimposition of the tool rotation with amplitudes up to 15 µm
- Process forces reduced by up to 50% through ULTRASONIC enable, depending on requirements: higher feed rates, improved surface quality up to Ra <0.1 µm, longer tool life
- Specific coolant treatment systems with centrifuges, optimized for the ULTRASONIC processing of Advanced Materials
ULTRASONIC 3rd Generation - Optimal process control through intelligent controls
- Constant amplitude in the process to ensure reproducibility
- Automatic detection of the working frequency, significantly improved hardware for signal acquisition
- Frequency tracking and simultaneous power control in real time for optimal process stability
- Ensuring the ULTRASONIC advantages even with non-optimal tools
- Fully compatible with 2nd generation ULTRASONIC actuator
5-Axes Simultaneous Machining with proven Swivel Rotary Table
- Swivel range of the B-axis -5/ +110°
- Table load up to 400 kg
- Cooling of table unit table bearings and drives
Mill-Turn Operation
- Speed of the C-axis up to bis 1,200 rpm
- Motorspindle with 18,000 rpm , 130 Nm and HSK A63
Spindles
- speedMASTER 20,000 rpm in standard version
- speedMASTER 15,000 rpm with 200 Nm (option)
- Motorspindle 24,000 rpm (option)
Accuracy
- Cooling of table unit, table bearings and drives
- Cooling of bearings and spindle nuts of ball screw drives
- Cooled guideways in the linear axes X/Y/Z
Application Examples
Automation
Standard automation and customised solutions in the VERTICO design
Automation is a key element of digital production. Every DMG MORI machine can be upgraded with standard automation or with a customised automation solution for flexible manufacturing systems:
PH 150
Universal pallet handling from DMG MORI
- Control directly via the machine control system
- High variability of available configurations from 24 round pallets of ø 148 to four 500 × 500 mm pallets
- Up to 150 kg workpiece weight as standard (optionally expandable to 250 kg)
- Possibility to prioritize orders
- EROWA clamping system as standard, SCHUNK optional
- High clamping repeatability (< 0.002 mm for the chuck EROWA UPC-P)
- Optimal accessibility to the machine and automation
Videos
PH Cell 300
PH Cell 300 - Modular pallet handling for up to 40 pallets
- Modular automation concept with up to 40 storage locations in a 10.7 m2 footprint
- Handling of different pallet sizes in one system
- Up to 300 kg transfer weight (workpiece incl. pallet)
- Separate setup station for ergonomic and simultaneous loading and unloading of pallets
- Convenient and simple control of the automation directly via the machine control panel
Videos
PH Cell Twin
PH Cell Twin - Modular pallet handling for 2 machines and up to 30 pallets
- One pallet handling device for 2 machines
- Up to 30 pallets on 12.9 m² due to double row pallet storage on each level
- Workpieces up to 500 x 500 x 500 mm
- Up to 300 kg transfer weight (workpiece incl. pallet)
- Retrofit of the second machine possible
- Attractively priced automation in DMG MORI VERTICO design
Videos
Robo2Go Milling
Flexible workpiece handling for small to medium batch sizes
- One app for uniform control of all Robo2Go variants, setting up a new workpiece < 5 minutes
- Strong construction for all requirements: load capacity robot optionally 25 or 35 kg
- Handling of components 20 - 200 mm in size
- Full accessibility to the machine is maintained
- Alignment and turning station for automated 6-sided complete processing
Highlights
One app for uniform control of all Robo2Go variants.
- Integrated in the machine control operation via CELOS APP: No need to change your NC programs!
- Intuitive usability thanks to dialog-guided software
- Creation of the process through predefined program modules via drag & drop: No robot programming knowledge necessary
- Setting up a new workpiece < 5 minutes
Robo2Go Milling
- Strong construction for all requirements: Robot payload optionally 25 or 35 kg
- Handling of components 20 – 200 mm in size
Details
Exchangeable workpiece trays for maximum flexibility
Flexible gripper system, for workpieces up to 200 × 200 × 200 mm
MATRIS Light
Highly flexible and collaborative automation for workpieces up to 5 kg
- Freely movable workpiece handling, incl. robot and storage area on a trolley
- Workpieces up to 5 kg, or 2 × 2 kg with double gripper
- No infrastructure changes
- No safety fence necessary
- 600 × 900 mm footprint
- Collaborative robots, setup time <5 minutes
- Direct teaching without robot knowledge
- Easy connection via Ethernet
- Expansion (option)
- Storage for up to 108 workpieces (2-position storage for max. 36 workpieces as standard)
- Blow-off device
- Measuring system and quality check
Videos
WH 3 Cell
WH 3 Cell - Modular workpiece handling for the DMP series
- Modular automation system for workpieces up to 5.5 kg (3 kg as standard)
- Workpieces up to 300 x 200 x 100 mm
- Circulating storage system for workpieces up to 100 mm in height
- Up to 750 workpiece storage capacity
- Minimum space requirement, < 1.7 m2 for the WH 3 Cell
Highlights
DMP 35 with WH 3 Cell
WH 3 Cell – Automation system with large storage capacity
- Handling of workpieces up to 300/200/100 (l/w/h) mm, weight up to 3 kg with double gripper, up to 5.5 kg with single gripper
- Standardized modules
- Flexible and cost-effective
- Large storage capacity for up to 750 workpieces
- Everything from one factory
- Compact, space-saving system with a footprint of 1.66 m2
AMR 2000
Holistic automation on the shop floor
- Collaborative automation solution with free layout design
- Omnidirectional movement for minimal space requirements (turning radius 0m)
- Basis for additional tasks, e.g. B. tool handling, chip disposal, etc.
- Material transport from Euro pallets 1,200 x 800 mm
- Maximum transport weight of up to 2,000 kg
- Security based on Sick and Siemens technology
Highlights
AMR 2000 Material
- Autonomous transport of material pallets
- Load capacity up to 2000 kg
- Compact and manoeuvrable
- Integration into existing processes
AMR 2000 chips
- Autonomous transport of chip trolleys
- Automatic pick-up order from the DMGMORI master computer
- Integration into existing material processes
- Extension of machine tool autonomy over the night or weekend
- Fleet ready
AMR 2000 tool handling
- Tool identification in the standard
- Quick installation of the automation system
- Reliable technology with proven components
- Integration into existing production possible
- Max. tool dimensions ø 280 / 400 mm
- Max. tool weight 30 kg
- Transport weight 720 kg (24× 30 kg)
- Maximum number of tools: 24 pcs
PH-AMR
Pallet automation with maximum flexibility through free layout design
- Modular concept with flexible layout design
- Driverless transport systems without guide rails or tracks
- Collaborative: Man and machine in one system
- Navigation through natural navigation
- Pallet sizes from 500 × 500 mm to 1,600 × 1,250 mm
- Workpieces up to 5,000 kg and ø 1,600 mm
Highlights
Free accessibility
- Best visibility into the workspace at any time
- Manual or crane loading still possible
- Collaborative system – man and machine in one system
Modular concept with free layout design
- No safety housing for the automation system necessary
- Free positioning possibility of the individual modules
- Subsequent integration into existing production
Simple expansion of automation system
- Additional shelf modules to increase the number of storage places
- Additional AMRs can be integrated in the system
- Machines with an automation interface can be integrated very quickly afterwards
Minimum space requirement
- Free pallet handling system without fixed installation requirements on hall floor
- AMR paths remain walkable and passable
- Laser scanners guarantee personal protection in driving direction
- Omnidirectional movement for minimum space requirements (turning circle 0m)
- Flexible automation concept - Automation of different machine types with one system
Control & Software
ULTRASONIC feedCONTROL
- Automatic reaction of process changes (materials, tool abrasion) by adapting the feed rate in the process
- Directly evaluates the signals (frequency and power) of the ULTRASONIC system
- Optionally also takes the spindle utilization into account
Highlights
Customer Benefits
- Always optimal process performance
- Process control through predefined parameter windows
- Safety for fragile workpieces made of brittle-hard materials
Left : ULTRASONIC feedCONTROL sets limit values “Upper / Lower Limit” for the machining process and monitored in real time. This determines the optimum “Operating Range” of the process. / Right : Via an intuitive user interface, ULTRASONIC feedCONTROL can be set up quickly. Parameters and required reactions are defined in this way.
intoolSENSOR
- Automatic detection of contact with the workpiece
- Tool breakage detection without additional measuring device
- Self-learning algorithm for precise contact detection
Highlights
Customer benefits
- Precise drilling depth independent of tool wear
- Time saving due to automatic recognition of the workpiece contact
- Increased process reliability due to closed control loop
Left: The ULTRASONIC system reacts to external load; Right: Tool contact detected
ULTRASONIC axialGRINDING
- Grinding of rotationally symmetrical structures in hard-brittle materials with highest performance
- Manufacturing of bearing rings, wafer chucks, microwave windows for many areas of the semiconductor industry, optics and technical ceramics
- Use for various contours, also spheres
Highlights
Customer Benefits
- Easy programming through intuitive operator masks
- Selection of different cutting edges and angle of the grinding tool
- Automatic adjustment of the tool contact point depending on the contour
Left : Different tool settings for changing the engagement point of the of the ULTRASONIC grinding tools. / Right : Simple setup of the grinding tools including edge radii.
Service & Training
Downloads & Technical Data
Workpiece
Max. workpiece diameter
630 mm
Max. workpiece height
500 mm
Max. workpiece weight
400 kg
Work Area
Max. X-axis stroke
600 mm
Max. Y-axis stroke
500 mm
Max. Z-axis stroke
500 mm